Step By Step Guide
In this Guide, I am going to show you how to tape an amazing hula hoop design.
I’ll share you some design secrets, go over F.I.G. compliance, and safety tips.
As a bonus, I’ll teach you how to keep your hoop in tip-top shape.
By the end of this guide, you’ll know exactly how the pros do it!
Let’s get started.
Plan your colors and materials ahead of time. Invest into quality materials so that your your hard doesn’t go to waste.
TIP: If you are just starting out, keep your design and colors simple. You don’t want to stress yourself out with something that should be fun. Remember most people won’t get it right their first time. Stay relaxed and enjoy the process. 🙂
Chapter 1:
Now that we have all our materials on hand, you can start laying the foundation of our design.
This is a neat trick I learned that is especially useful for hoops with rivets.
Keep in mind that making mistakes and repeating steps is a normal part of the learning process.
Hoops that are attached at contact points can come apart without proper support. You will definitely want to add some extra support to help prevent your hoop from falling apart.
TIP: Avoid air bubbles keeping the tape tight, as your roll it around the hoop. Keep your eyes open for air bubbles. If you see air bubbles, use your fingers to push them out. If you can’t get the bubbles out, it is best to try to re apply with a new piece of tape.
GYMNASTICS NOTE: As of November of 2018 F.I.G. related events must use F.I.G. certified products. Make sure to leave a certified mark or label visible when applying your design if you plan to compete professionally.
This is an important step, especially if you are using your hoop for intense routines. Your hoop is thrown to great heights!
Chapter 2:
In this chapter ill show you a tip to help keep your design symmetrical so you can achieve the same look from all angles.
As well as an over the shoulder look on how we apply a quick 2 color design.
This is where the fun really starts.
1)Set markers to help guide you through the design. Half way points on each side will indicate when to switch colors. The Design I am making today will be made of two base colors using blue and a light transparent pink.
2)I begin by adding my blue tape around the hoop to the half way point. Keep an eye on the distance of the overlap as you wrap the hoop. You dont want to waste too much tape or weigh your hoop down too much.
3)At the half way I switch to the pink colored tape and continue you taping.
TIP: Avoid air bubbles by keeping the tape tight between your hand and the club. Apply the tape from one end and then applying pressure as you lay the rest of it down. If you spot air bubbles its best to use your fingers try to push them out or re-apply. Here are some close up angles to give you more detail.
Congratulations!! You’ve taped your hoop! At this point or future steps, when you’ve had enough you can skip to the final step that will teach you how to add a layer of security to your design. If you want to create something really cool… then read on.
Chapter 3:
This section is about adding more advanced design techniques to your hula hoop.
If it’s your first hoop… don’t worry though, because the first tip is pretty easy to do.
The other tips will show you how to add spirals plus even more spirals to your spirals!
1)This is is relatively easy trick to implement. All you do is add a color on the inside of the hula hoop. You can get more creative and add different colors but I will keep it simple with one color.
Here is an up close shot of me finishing up the silver tape on the inside. Combining this with the right colors can make the hoop mesmerizing, especially with the right choreography.
TIP: Avoid air bubbles by keeping the tape tight between your hand and the club. Apply the tape from one end and then applying pressure as you lay the rest of it down. If you spot air bubbles its best to use your fingers try to push them out or re-apply.
2)Time for the spiral effects. Using the grey colored tape, I cut 18 – 24 inches of tape and then cut it again at a very long angle (imagine a very thin triangle). Starting at the point where the two colors meet we start wrapping it around the hoop gradually increase the space to give an nice spiral effect.
3)Now I replicate the last step into the blue colored side of the hoop.
Here is an overhead image of what the finished top of the spiral design looks like.
4)Now I repeat the steps on the other side. You can see the silver we added on the inside gives the different tapes we added a multitude of colors especially with the holographic style tapes.
5) From here I am gonna add “spirals into spirals”. To do this, cut a foot long piece of colored tape again about a foot long. Continue to cut it into a very thin triangle but with 2 of the sides at the same length. Start with one spiral and start by adding another spiral right below it.
6)Again the same steps with some of our primary colors all the way around the hula hoop. Using these tricks and the right colors you can really accomplish some amazing designs.
You can optionally use some stamp cuts to add some shapes and letters to your design. But I wont be applying them to this design.
That’s it! You’ve mastered some basic and advanced skills. Now time for the last final steps to help our design last a little longer.
Bonus Chapter:
You have spent a lot of time, effort, heart, and hopefully not but maybe ever tears.
Now spend the time to protect it with this simple step.
As an added bonus this will help give an extra shine that looks pretty under direct lighting.
1)Just add a layer of scotch tape going evenly around your design, once or twice. This helps make it water proof and protect it from minor scratches and bumps.
TIP: Avoid air bubbles by keeping the tape tight between your hand and the club. Apply the tape from one end and then applying pressure as you lay the rest of it down. If you spot air bubbles its best to use your fingers try to push them out or re-apply.
Finally you are done. Sit back and take a look at your work of art. Good job and congratulations on a job well done.
Conclusion:
You know a bunch of professional tips and tricks.
Now, you have spent a lot of work and money on a professional design…. get the gear to protect it.
Make it or buy it, but protect your hula hoop no matter what.
Check out Some Design Examples
If you plan to travel a lot then a hoop cover is a must have accessory. The great thing is you don’t have to get complicated or expensive. Even a towel would work. Just make sure to plan ahead and think of something for extra defense.
Now it’s your turn to share your thoughts. I’d love to hear what you think about my design. Comment below and share some great designs you’ve come up with.
Call: (818) 913-0250
Email: info@jenerg.com
Address: 19860 Nordhoff Place, Chatsworth, CA, 91311
Please Check Google Business or Yelp Profiles for Up to Date Hours
At Jenerg.com it is our goal to improve the shopping, learning and searching experience, for all things gymnastics.
Join us as we grow our knowledge and product base.
Ⓒ Copyright 2025 Jenerg
Add a comment